Greentec Jaguar 40/80 highway suitable 3,5 tons
Greentec 40 cm drum chipper, now available as 80 km/h trailer! With a weight just above the 3000 kg and the newest Stage V 140 HP Doosan engine that meets the latest requirements. Also this chipper is available with our combination infeedchute for crane and hand infeed! The big top roller with a diameter of 40 cm easily pulls the materials into the chipper. All around equiped with hydraulic support legs and all chipper functions are manually and radio remote controlled.
140 hp
40 cm
20 mm
< 3500 kg
Fitted as standard
- Top roller with combi infeed tablefor hand infeed and crane feed, hydraulic raisable
- Type C chute, hydraulic; slewing, up and down, deflector adjustment
- Hydraulic support leg front
- Dual hydraulic support leg at the rear
Big upper infeed roller
Combi hand infeed and crane feed
Screen easy to access and change
Knives easily accessible
Remote control
Hydraulic support legs
Options
- Top roller with bottom roller and combi infeed table for hand infeed and crane feed, hydraulic raisable
- Extra cable control tracks
- Cone holder (long)
- Winch incl. radiocontrol, hydr. Valves and mounting
- RDW-, TÜV- or PVG-approval
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Drum |
| (Quick-change) Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 20 mm thick and main axe Ø70 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Upper infeed roller internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
| Screenunit |
| Easy replacing of the screen at the side of the machine. Possible to chip without screen. |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Anvil knife adjustable, and can be used four times |
Technical Specifications | |
| Infeed opening (mm) | 400 x 600 |
| Feed opening channel (mm) | 420 x 600 |
| Max. infeed softwood (mm) | Ø 400 |
| Drum (mm) | Ø 600 x 600 |
| Top roller (mm) | Ø 430 |
| Chipper knives | 4 |
| Anvil knives | 1 |
| Max. chip length (mm) | 20 |
| 12, Chassis |
| Suspended tandemchassis tires 185R14C |
| Fully galvanised/electroplated |
| Overrun brake and handbrake |
| High-speed version 80 km/h |
| Swivel ball joint 50mm |
| 6, Motor |
| Electrical start |
| Ad-Blue |
| manual clutch |
| Control |
| Remote control (GCS1.1) for chipperfunctions Jaguar 40<br /> – Deflector adjustment<br /> – Chute rotation<br /> – Chute up/down<br /> – In/outfeed<br /> – Roll open or extra down pressure<br /> – Engine up/down |
| Type C chute, hydraulic; slewing, up and down, deflector adjustment |
| Hydraulic support leg in the front |
| Dual hydraulic support leg at the rear |
