200 – 450 HP
55 cm
Fitted as standard
- GCS control
- Combinationpipe, hydraulic up and down, electric chip deflector
- Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit
- Stable hydraulic raisable infeedtable, usable in multiple positions
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
- Chassis hydraulic brakes
- Woodcrane with G121 Indexator rotator with braked link TG 28 4-teeth together with heavy duty platform front of the drawbar double hydraulic support leg
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = under pressure/vacuum
yellow = snippers
Upper feed roller internally driven by a heavy poclain motor
high tipper
Knives are easy accessible, under a hinged cover, on the top of the machine.
Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit.
Options
- Remote control for operating chipper
- Closed infeedchain
- Electric start aid 12 volt including cable set
- Different crane and crane control options
- Suspension air- suspended instead of hydraulic
- Balanced suspension with mechanical/hydraulic steered last axle
- Different lighting and support leg wheel set options
Versions
- Available with 2 or 4 input rolls
- Container Volume 20 m3 of 25 m3
Closed infeedchain
Action board
Various crane and crane control options.
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Greentec drum woodchippers stand for uniform chips with low particulate percentage |
| Drum |
| Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 15 mm thick and main axe Ø100 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
| Upper infeed roller on both sides driven by heavy torq engines with embedded oil bearings (low maintenance) |
| Bottom roller driven by heavy engine with embedded oiled bearings (low maintenance) |
| Screenunit |
| Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
| Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Anvil knife adjustable, and can be used four times |
Technical Specifications | 2-infeed rollers |
| Infeed opening (mm) | 600 x 1060 |
| Feed opening channel (mm) | 550 x 1060 |
| Max. infeed hardwood (mm) | Ø 350 |
| Max. infeed softwood (mm) | Ø 550 |
| Drum (mm) | Ø 960 x 930 |
| Top roller (mm) | Ø 500 x 1060 |
| Bottom roller (mm) | Ø 300 x 1060 |
| Chipper knives | 4 |
| Anvil knives | 1 |
| Max. chip length (mm) | 25 |
| Gross weight max. (tonnes) (k80) | 28 |
| Loading capacity tandem axle (tonnes) | 24 |
| Power requirements (HP) | 200 – 450 |
| Capacity up to (m3/hour) | 140 |
| Towbar height according to drawing |
| Hydraulic support leg rear |
| LED-lighting around according to guidelines |
| 7-pole light connection |
| Steel toolbox on both sides, with lock and key |
| Low maintenance oil cooled overrun clutch integrated in pulley |
| Greentec Control System 3.0 box with touchscreen, to be placed in cab |
| Hydraulic tilting Venturi discharge funnel 952Mega |
| Air brakes, 2 air ducts VC20 |
| Ball head coupling K80 |
GCS control – Greentec Control System
- Compact touchscreen control.
- Programs for different wood types.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
- Chip size and wood type adjustable at any time.
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system.
- GCS control box compact design with stainless steel casing.
- Vulcanised controllers without moving parts, less chance of error.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Exclusive on Ufkes Greentec machines.
- Least possible electronics (relay, cables and more), operational reliability.
- Minimum cables on the machine, only Canbus signal with plus and minus.
- Vulcanised controllers without moving parts, less chance of error.
- Waterproof up to IP67.
- 5 languages available; Dutch/English/French/German/Polish.
“Unique system, only with Greentec machines”
