Greentec 942/13 rear infeed
100 – 220 HP
45 cm
Fitted as standard
- Stable hydraulic raisable infeedtable, suitable for threepoint model
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
- Venturi discharge chute can be tilted hydraulically
Lots of blowing power thanks to integrated blower system, and Venturi funnel
red = blowing power
blue = vacuum
yellow = wood chips
Upper feed roller internally driven by a heavy poclain motor
Knives are easy accessible, under a hinged cover, on the top of the machine
High tipper
Options
- Lighting set
- Camera
- Tool holder
- Extra cable control
- RDW-, TÜV- or PVG-approval
Features |
Woodchipper |
Own hydraulic cooling system (using Venturi airflow) |
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
No nonsense machine; chipping at the front, discharge at the back. |
No jacks or accelarator needed, which otherwise shatters good woodchips. |
This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
Greentec drum woodchippers stand for uniform chips with low particulate percentage |
Drum |
Knives distributed along the drum. Drum with blower blades on both sides. |
Widia bottom knive placed below cutting knive, easy accessible |
Exterior wall of drum is 15 mm thick and main axe Ø80 mm |
Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
Infeed |
Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
Upper infeed roller internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
Bottom roller driven by heavy engine with embedded oiled bearings (low maintenance) |
Screenunit |
Venturi discharge chute can be tilted, for easy replacing of the sieve unit |
Quality |
All machines are manufactured out of premium steel 355 (52-3) |
Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
Discharge chute and bottom beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
After sandblasting machines are double powder coated |
Servicing |
Knives are easy accessible, under a hinged cover, on the top of the machine. |
Drum is easily secured for changing knives. |
Anvil knife adjustable, and can be used four times |
Technical Specifications | 2-infeed rollers |
Infeed opening (mm) | 520 x 710 |
Feed opening channel (mm) | 550 x 710 |
Max. infeed hardwood (mm) | Ø 300 |
Max. infeed softwood (mm) | Ø 450 |
Drum (mm) | Ø 960 x 730 |
Top roller (mm) | Ø 430 x 710 |
Bottom roller (mm) | Ø 300 x 710 |
Chipper knives | 3 |
Anvil knives | 1 |
Max. chip length (mm) | 22 |
Power requirements (HP) | 100 – 220 |
Capacity up to (m3/hour) | 100 |
Version | Tandem, 4- wiel braked |
Container Volume (m3) | 14 |
Gross weight max. (tonnes) (k80) | 20 |
Loading capacity tandem axle (tonnes) | 16 |
Hydraulic support leg front |
LED-lighting around according to guidelines |
Steel toolbox on both sides, with lock and key |
Continuous PTO underneath buncker |
Gear casing full oilbath bearing |
Remote control (GCS1.1) for chipperfunctions Jaguar 40/942D<br /> – Deflector adjustment<br /> – Chute rotation<br /> – Chute up/down<br /> – In/outfeed<br /> – Roll open or extra down pressure |
Hydraulic tilting Venturi discharge funnel 942 |
Air brakes, 2 air ducts VC13/16 |
Stable hydraulic raisable infeedtable, usable in multiple positions |
Combination chute, hydraulic slewing without deflector |
High tipping bunker 13m3 left tipping with hydraulic overflow side gate |
Driveline PTO 1000 rpm GT942 |