quality
individual
solutions
Greentec Cheetah 30 compact front version
80 – 200 HP
30 cm
12 – 22 mm
app. 1900 kg
- Own hydraulic cooling system (using airstream of blades of disc)
- Less power needed because the infeed is at an angle
- Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance
- All machines are manufactured out of premium steel 355 (52-3)
- Easy to maintain
2 agressive infeed rollers.
Optimum cutting angle, less power and less fuel.
Infeedfunnel with unique slots at the bottom: sand, soil and gravel will damage the blades less, meaning longivity of the blades (when cranefed)
Fitted as standard
- Radio remote control
- High curved chute hydraulically slewing on tractor hydraulics with electrically adjustable deflector
- Infeedfunnel with unique slots at the bottom: sand, soil and gravel will damage the blades less, meaning longivity of the blades (when cranefed)
- Infeedroller hydraulically opened
- PTO
Options
- Discharge extension 500 cm 2 separate windblades and extra wear plate in curve
- Winch
- Combi hand infeed and crane feed, hydr. raisable instead of crane feed
- Crane and crane operating
- Front light set
- Towbar
- Hydraulic single action connector
- Special colour versions
Combi hand infeed and crane feed, hydr. raisable instead of crane feed.
Discharge extension 500 cm
Radio remote control for crane and chipper
Features |
| Woodchipper |
| Own hydraulic cooling system (using airstream of blades of disc) |
| 2 agressive infeed rollers both independently driven |
| Infeed on three sides fitted with anvilknives, making it easy to adjust for right chip length, even after many working hours. |
| Less power needed because the infeed is at an angle |
| Chipper disc |
| Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom beneath disc equipped with replacable wear plate made of hardwearing Hardox steel |
| After sandblasting machines are double powder coated |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| Servicing |
| Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine |
| Disc is easy to lock for chaging the knives |
| Hinged lid over rollers, underneath grease points are easy to reach |
| Anvil knife adjustable, and can be used twice |
Technical Specifications | |
| Infeed opening (mm) | 300 x 580 |
| Feed opening channel (mm) | 300 x 320 |
| Disc (mm) | Ø 960 x 58 |
| Anvil knives | 3 |
| Max. chip length (mm) | 22 |
| Drive | PTO 540E/1000/1000E |
| Revolutions disc (rpm) | 750 /850/1000 |
| Number of knives on disc | 2 |
| Infeed speed (m/s) | 0,6 |
| Capacity up to (m3/hour) | 40 |
| Power requirements (HP) | 80-200 |
| Infeedroller hydraulically opened |
| High curved chute hydraulically slewing on tractor hydraulics with electrically adjustable deflector (see illustration for measurements) |
