quality
individual
solutions
Greentec 942 track
300 HP
45 cm
app. 8250 kg
22 mm
Fitted as standard
- GCS control.
- Pipe, hydraulic up and down, hydraulic chip deflector.
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
- Fitted with widia anvil knife
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = under pressure/vacuum
yellow = snippers
Upper feed roller internally driven by a heavy poclain motor.
Rubber track
Knives are easy accessible, under a hinged cover, on the top of the machine.
Options
- Quick-change knives
- Closed infeedchain
- Standing infeed rollers
- Hydraulic tilting Venturi nozzle
- Infinitely adjustable flexar reversal fin, saves fuel, reduces noise
- Different crane and crane control options
- Track options: steel track, rubber on steel
- With slewing ring, machine can be turned hydraulically
- Radio remote control
Stable hydraulic raisable infeedtable, with closed infeedchain, usable in multiple positions
Slewing ring, machine can be turned hydraulically
Quick-change knives
Hydraulic tilting Venturi
Radio remote control
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Greentec drum woodchippers stand for uniform chips with low particulate percentage |
| Drum |
| Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 15 mm thick and main axe Ø80 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
| Upper infeed roller internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
| Bottom roller driven by heavy torq engine with embedded oiled bearings (maintenance-free) |
| Screenunit |
| Venturi discharge chute can be tilted, for easy replacing of the sieve unit |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
| Discharge chute and bottom beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Anvil knife adjustable, and can be used four times |
Technical Specifications | 2-infeed rollers |
| Infeed opening (mm) | 620 x 710 |
| Feed opening channel (mm) | 550 x 710 |
| Max. infeed hardwood (mm) | Ø 300 |
| Max. infeed softwood (mm) | Ø 550 |
| Drum (mm) | Ø 960 x 730 |
| Top roller (mm) | Ø 430 x 710 |
| Bottom roller (mm) | Ø 300 x 710 |
| Chipper knives | 3 |
| Anvil knives | 1 |
| Max. chip length (mm) | 25 |
| John Deere 6.8L300 HP Tier 4 Final / Stage 5 Capacity app. 100m³/hour 210L fuel tank |
| Disc clutch, manual 300 HP |
| Greentec Control System 3.0 box with touchscreen, to be placed in the motorhousing |
| Cabled emergency control (coming home) |
| Hydraulic tilting Venturi discharge funnel together with extended Venturi funnel for extra short transport height |
| Oil cooler |
| Lighting set LED; 4 Worklights |
| Fitted with widia anvil knife |
GCS control – Greentec Control System
- Compact touchscreen control.
- Programs for different wood types.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
- Chip size and wood type adjustable at any time.
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system.
- GCS control box compact design with stainless steel casing.
- Vulcanised controllers without moving parts, less chance of error.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Exclusive on Ufkes Greentec machines.
- Least possible electronics (relay, cables and more), operational reliability.
- Minimum cables on the machine, only Canbus signal with plus and minus.
- Minimal chance of errors
- Waterproof up to IP67.
- 5 languages available; Dutch/English/French/German/Polish.
“Unique system, only with Greentec machines”
