100 – 280 HP
45 cm
Approx 6600 kg
Fitted as standard
- GCS Control (Greentec Control System)
- Combinationpipe, hydraulic up and down, hydraulic chip deflector
- Stable hydraulic raisable infeedtable, usable in multiple positions
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
- Chassis hydraulic brakes
Upper two infeed rolls internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering.
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = negative pressure / vacuum
yellow = woodchips
Knives are easy accessible, under a hinged cover, on the top of the machine.
With extra large toolbox.
Options
- Remote control
- Heavy duty 3-rows forged steel infeedchain hydraulic raisable
- Hydraulic tilting Venturi
- Electric start aid 12 volt including cable set
- Different crane and crane control options
- Suspension air–suspended instead of hydraulic
- Different lighting and support leg chassis options
Versions
- Available with 2 or 4 rollers
Heavy duty 2-rows forged steel infeedchain hydraulic raisable.
Venturi discharge chute can be tilted, for easy replacing of the sieve unit.
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Greentec drum woodchippers stand for uniform chips with low particulate percentage |
| Drum |
| Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 15 mm thick and main axe Ø80 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
| Upper infeed roller internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
| Bottom roller driven by heavy engine with embedded oiled bearings (low maintenance) |
| Screenunit |
| Venturi discharge chute can be tilted, for easy replacing of the sieve unit |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
| Discharge chute and bottom beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Anvil knife adjustable, and can be used four times |
Technical Specifications | 2-infeed rollers |
| Infeed opening (mm) | 520 x 710 |
| Feed opening channel (mm) | 550 x 710 |
| Max. infeed hardwood (mm) | Ø 300 |
| Max. infeed softwood (mm) | Ø 450 |
| Drum (mm) | Ø 960 x 730 |
| Top roller (mm) | Ø 430 x 710 |
| Bottom roller (mm) | Ø 300 x 710 |
| Chipper knives | 3 |
| Anvil knives | 1 |
| Max. chip length (mm) | 22 |
| Single axle | braked 40 km/h |
| Power requirements (HP) | 100 – 280 |
| Capacity up to (m3/hour) | 100 |
| Towbar height according to drawing |
| Standard with extra large toolbox |
| Hydraulic tilting Venturi discharge funnel 942 |
| Air brakes, 2 air ducts 942-1W/952-1W/962-1W |
| Stable hydraulic raisable infeedtable, usable in multiple positions |
| High chute 1200mm extension, hydraulic; slewing, up and down, deflector adjustment |
| Tires 600/50R22,5 BKT FL630 |
GCS – Greentec Control System
- Compact touchscreen control
- Programs for different wood types
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage
- Chip size and wood type adjustable at any time
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system
- GCS control box compact design with stainless steel casing
- Vulcanised controllers without moving parts, less chance of error
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed
- Exclusive on Ufkes Greentec machines
- Least possible electronics (relay, cables and more), operational reliability
- Minimum cables on the machine, only Canbus signal with plus and minus
- Minimal chance of errors
- Waterproof up to IP67
- 5 languages available; Dutch/English/French/German/Polish
“Uniek systeem, alleen bij Greentec machines”
