Greentec Cheetah 30/14A rear infeed
80 – 180 HP
30 cm
12 – 22 mm
Fitted as standard
- Combi infeed table for hand infeed and crane feed
- 2 agressive infeed rollers both independently driven
- Massieve hakschijf van 58 mm zorgt voor veel slagkracht
- Vraagt weinig vermogen doordat de invoer schuin op de schijf staat
- Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance
- Manufactured out of premium steel and Hardox steel wearplates
- Infeedroller hydraulically opened
2 agressive infeed rollers
Infeedfunnel with unique slots at the bottom.
Combi infeed table for hand infeed and crane feed
Optimum cutting angle.
High tipper
Options
- Possible with TÜV or PVG approval
- Light options: LED-lighting, flashlights, beacon
- Tool holder
Features |
| Woodchipper |
| Own hydraulic cooling system (using airstream of blades of disc) |
| 2 agressive infeed rollers both independently driven |
| Infeed on three sides fitted with anvilknives, making it easy to adjust for right chip length, even after many working hours. |
| Less power needed because the infeed is at an angle |
| Chipper disc |
| Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom beneath disc equipped with replacable wear plate made of hardwearing Hardox steel |
| After sandblasting machines are double powder coated |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| Servicing |
| Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine |
| Disc is easy to lock for chaging the knives |
| Hinged lid over rollers, underneath grease points are easy to reach |
| Anvil knife adjustable, and can be used twice |
Technical Specifications | |
| Infeed opening (mm) | 300 x 580 |
| Feed opening channel (mm) | 300 x 320 |
| Disc (mm) | Ø 960 x 58 |
| Anvil knives | 3 |
| Max. chip length (mm) | 22 |
| Number of knives on disc | 2 |
| Infeed speed (m/s) | 0,6 |
| Capacity up to (m3/hour) | 40 |
| Power requirements (HP) | |
| from 100-200 hp | 1000/1000eco rpm tractor pto and 1000 rpm disc |
| Container Volume (m3) | 14 |
| Gross weight max. (tonnes) (k80) | 20 |
| Loading capacity tandem axle (tonnes) | 16 |
| Steel toolbox on both sides, with lock and key |
| Continuous PTO underneath buncker |
| Chipper in fixed 3-point hitch behind the high tipper |
| Heavy duty manual support leg |
| Hydraulic support leg front, extra stability while raising high tipper |
| Infeed table controlable with tractor hydraulics |
| Remote control (GCS1.1) for chipperfunctions Cheetah 30 3-point linkage mounted<br /> – Deflector adjustment<br /> – In/outfeed<br /> – Roll open |
| Infeedroller hydraulically opened |
| Cheetah 30-13 chute, manual turnable & manual deflector adjustment |
| Air brakes, 2 air ducts VC13 |
| High tipping buncker 14m3 right tipping with hydraulic overflow side flap |
| Combi hand infeed and crane feed, hydraulic raisable |