Greentec 962 side loading
425 / 780 HP
65 cm
Approx 14.500 kg
Fitted as standard
- GCS control box with touchscreen, to be placed in cab
- Stable hydraulic raisable infeedtable, usable in multiple positions.
- Pipe, hydraulic up and down, electric chip deflector.
- Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit.
- Lowered table for bottom roller providing more space for wood clamp to insert thick logs.
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
- Heavy duty support leg, manual
- Air brakes
- Oil cooler
- Automatic reversible fan for cleaning the radiator
Upper feed roller internally driven by a heavy poclain motor.
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
Heavy duty support leg.
(Quick-change) Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine, giving direct view of knive and anvil knife
Venturi discharge chute can be tilted hydraulically.
Options
- Remote control for operating chipper
- Standing infeed rollers ∅ 300 x 710
- Stable hydraulic raisable infeedtable, with closed infeedchain, usable in multiple positions
- Palfinger M70F101 or C60F86 crane
- Front support leg, using with hydraulicvalve of the tractor instead of heavy duty supportleg, manual
- Chassis air brakes instead of hydraulic brakes
- Different lighting and support leg options chassis
- Woodsplitter 20 ton at 200 bar till 950mm
Stable hydraulic raisable infeedtable, with closed infeedchain, usable in multiple positions
Standing infeed rollers
“The Wood chipper makes a nice product. The chip size and the wide infeed allowing all side branches and splits to go in are really advantageous features of this chipper” – Michel Fuhler in De Loonwerker
Features |
Woodchipper |
Own hydraulic cooling system (using Venturi airflow) |
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
No nonsense machine; chipping at the front, discharge at the back. |
No jacks or accelarator needed, which otherwise shatters good woodchips. |
This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
Greentec drum woodchippers stand for uniform chips with low particulate percentage |
Drum |
(Quick-change) Knives distributed along the drum. Drum with blower blades on both sides. |
Widia bottom knive placed below cutting knive, easy accessible |
Exterior wall of drum is 40 mm thick and main axe Ø125 mm |
Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
Infeed |
Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
Smaller top roller with minimal distance to drum, |
Upper two infeed rolls internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
Bottom roller driven by heavy Poclain wheelengine |
With the electronic adjustable piston pump and a working pressure of max. 350 bar there is maximum infeedcapacity |
and minimal heat generation of the oil |
Infeed speed always parallel to speed drum, and easy electronically adjustable |
Screenunit |
Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit |
Quality |
All machines are manufactured out of premium steel 355 (52-3) |
Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
After sandblasting machines are double powder coated |
Servicing |
(Quick-change) Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine, giving direct view of knive and anvil knife |
Drum is easily secured for changing knives. |
Changing a knive takes about 5-10 min |
Anvil knife adjustable, and can be used twice |
Technical Specifications | 3-infeed rollers |
Infeed opening (mm) | 750 x 1450 |
Feed opening channel (mm) | 650 x 920 |
Max. infeed hardwood (mm) | Ø 400 |
Max. infeed softwood (mm) | Ø 650 |
Drum (mm) | Ø 960 x 930 |
Top roller (mm) | Ø 350 |
Bottom roller (mm) | Ø 300 |
Chipper knives | 6 |
Anvil knives | 1 |
Max. chip length (mm) | 34 |
Anti torsy frame |
Built on chassis, side loading |
Towbar height according to drawing |
Greentec Control System 3.0 box with touchscreen, to be placed in the motorhousing |
Hydraulic tilting Venturi discharge funnel 962 |
Air brakes, 2 air ducts 962 ZI-40 |
Oil cooler |
High chute 1200mm extension, hydraulic; slewing, up and down, deflector adjustment |
Slow traffic 40 km/h, balanced suspension, tires 710/50R26,5 BKT FL 630 |
Automatic reversible fan for cleaning the radiator |
GCS control – Greentec Control System
- Compact touchscreen control.
- Programs for different wood types.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
- Chip size and wood type adjustable at any time.
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system.
- GCS control box compact design with stainless steel casing.
- Vulcanised controllers without moving parts, less chance of error.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Exclusive on Ufkes Greentec machines.
- Least possible electronics (relay, cables and more), operational reliability.
- Minimum cables on the machine, only Canbus signal with plus and minus.
- Minimal chance of errors
- Waterproof up to IP67.
- 5 languages available; Dutch/English/French/German/Polish.
“Unique system, only with Greentec machines”