quality
individual
solutions
Greentec 962 motor mounted hooklift
≤ 75 cm
425 / 684 HP
34 mm
Fitted as standard
- John Deere 9L 425 HP Tier 4 Final / Stage 5 Capacity app. 165m³/hour 500L fuel tank
- GCS control box with touchscreen, to be placed in cab
- Easy and powerful infeed thanks to the large Ø 620 mm feed roller with integrated Poclain wheel motor
- Stable hydraulic raisable infeedtable, usable in multiple positions
- Pipe, hydraulic up and down, electric chip deflector.
- Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit.
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
Easy and powerful infeed thanks to the large Ø 620 mm feed roller with integrated Poclain wheel motor
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = under pressure/vacuum
yellow = snippers
container chassis
(Quick-change) Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine, giving direct view of knive and anvil knife
Venturi discharge chute can be tilted hydraulically.
Options
- Top roller Ø 620 with 2 standing infeed rollers, infeed opening 1450mm
- Stable hydraulic raisable infeedtable, with closed infeedchain, usable in multiple positions
- Continuous infeed chain to below the top roller(s)
- Equiped with standard knives, can be sharpend several times and widia anvil knife
- Equiped with quick-change knives (max. chip length 30 mm) and widia anvil knife
- Extra oil pump, suitable for 425 hp motor
- John Deere 13,6L 684 HP Tier 4 Final / Stage 5 with automatic enabled clutch 700L fuel tank
- Besonders komfortable XXL-Kabine
- Palfinger S110F101 / M70F101 / C60F86 Forstkran
Standing infeed rollers, infeed opening 1450mm
Continuous infeed chain to below the top roller(s)
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Greentec drum woodchippers stand for uniform chips with low particulate percentage |
| Drum |
| (Quick-change) Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 40 mm thick and main axe Ø125 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
| Easy and powerful infeed thanks to the large Ø 620 mm feed roller with integrated Poclain wheel motor. Powered by hydraulic high-pressure system of 350 bar max. |
| Infeed rollers driven by heavy, maintenance free Poclain wheelengine |
| With the electronic adjustable piston pump and a working pressure of max. 350 bar there is maximum infeedcapacity and minimal heat generation of the oil |
| Infeed speed always parallel to speed drum, and easy electronically adjustable |
| Screenunit |
| Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
| Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| (Quick-change) Knives are easy accessible when the infeed roller is hydraulically positioned above the machine, giving direct view of knive and anvil knife |
| Drum is easily secured for changing knives. |
| Changing a knive takes about 5-10 min |
| Anvil knife adjustable |
Technical Specifications | |
| Infeed opening (mm) | 750 x 1450 |
| Feed opening channel (mm) | 750 x 920 |
| Max. infeed hardwood (mm) | Ø 400 |
| Max. infeed softwood (mm) | Ø 750 |
| Drum (mm) | Ø 960 x 930 |
| Top rollers (mm) | Ø 620 |
| Bottom roller (mm) | Ø 300 |
| Chipper knives | 6 |
| Anvil knives | 1 |
| Max. chip length (mm) | 34 |
| Anti torsy frame |
| Built on chassis, side loading |
| Greentec Control System 3.0 box with touchscreen, to be placed in the motorhousing |
| Hydraulic tilting Venturi discharge funnel 962 |
| Oil cooler |
| High chute 1200mm extension, hydraulic; slewing, up and down, deflector adjustment |
| Automatic reversible fan for cleaning the radiator |
GCS control – Greentec Control System
- Compact touchscreen control.
- Programs for different wood types.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
- Chip size and wood type adjustable at any time.
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system.
- GCS control box compact design with stainless steel casing.
- Vulcanised controllers without moving parts, less chance of error.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Exclusive on Ufkes Greentec machines.
- Least possible electronics (relay, cables and more), operational reliability.
- Minimum cables on the machine, only Canbus signal with plus and minus.
- Minimal chance of errors
- Waterproof up to IP67.
- 5 languages available; Dutch/English/French/German/Polish.
“Unique system, only with Greentec machines”
