Greentec Jaguar 40/80 highway suitable 6,5 tonnes
New at Ufkes Greentec in the programme: The Jaguar 40/80 6.5 Ton version! This Jaguar can be equipped with a TG64T timber crane. Equipped with a Doosan Stage 5 140 hp engine, this is a real all-rounder. Logs up to 40 cm in diameter? No problem! The machine is equipped with hydraulic support legs all round and all chipper functions can be operated both manually and by radio. This chipper is mounted on a parabolic suspended heavy-duty tandem chassis and has air brakes.
140 HP
40 cm
20 mm
< 6500 kg
6,4 m
Fitted as standard
- Remote control (GCS1.1) for chipperfunctions Jaguar 40
- Top roller with bottom roller and combi infeed table for hand infeed and crane feed, hydraulic raisable
- Type C chute, hydraulic; turnable, up and down, deflector adjustment
- Hydraulic support leg front
- Cone holder (long)
Big upper infeed roller
Top roller with bottom roller and combi infeed table for hand infeed and crane feed, hydraulic raisable
Screen easy to access and change
Knives easily accessible
Remote control
Hydraulic support legs
Options
- TG64T wood crane with GR30 Rotator with remote control (SCAN) and crane mounting plate
- Slewing ring, machine can be turned hydraulically
- Radio remote control crane
- Top roller with closed infeedchain covering complete width of the infeedtable. Only for crane infeed
- RDW-, TÜV- or PVG-approval
Features |
| Woodchipper |
| Own hydraulic cooling system (using Venturi airflow) |
| Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
| No nonsense machine; chipping at the front, discharge at the back. |
| No jacks or accelarator needed, which otherwise shatters good woodchips. |
| This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
| Drum |
| (Quick-change) Knives distributed along the drum. Drum with blower blades on both sides. |
| Widia bottom knive placed below cutting knive, easy accessible |
| Exterior wall of drum is 20 mm thick and main axe Ø70 mm |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Infeed |
| Upper infeed roller internally driven by heavy, low maintenance Poclain engines, therefore no open slits besides the infeed, preventing chips from scattering |
| Screenunit |
| Easy replacing of the screen at the side of the machine. Possible to chip without screen. |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| After sandblasting machines are double powder coated |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Anvil knife adjustable, and can be used four times |
Technical Specifications | |
| Infeed opening (mm) | 400 x 600 |
| Feed opening channel (mm) | 420 x 600 |
| Max. infeed softwood (mm) | Ø 400 |
| Drum (mm) | Ø 600 x 600 |
| Top roller (mm) | Ø 430 |
| Chipper knives | 4 |
| Anvil knives | 1 |
| Max. chip length (mm) | 20 |
| 12, Chassis |
| Suspended tandemchassis tires 205/65R17,5 |
| Fully galvanised/electroplated |
| Airbraked and handbrake |
| High-speed version 80 km/h |
| Drawbar eye Ø 40mm fixed |
| Min. -Max. height drawbar 425-895mm |
| ABS |
| 6, Motor |
| Electrical start |
| Ad-Blue |
| manual clutch |
| Control |
| Remote control (GCS1.1) for chipperfunctions Jaguar 40<br /> – Deflector adjustment<br /> – Chute rotation<br /> – Chute up/down<br /> – In/outfeed<br /> – Roll open or extra down pressure<br /> – Engine up/down |
| Type C chute, hydraulic; slewing, up and down, deflector adjustment |
| Heavy duty manual support leg |
| Dual hydraulic support leg at the back |
