420 HP
55 cm
Approx 11.800 kg
Fitted as standard
- GCS control
- Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit
- Stable hydraulic raisable infeedtable, usable in multiple positions
- Pipe, hydraulic up and down, electric chip deflector
- Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = under pressure/vacuum
yellow = snippers
Upper feed roller internally driven by a heavy poclain motor.
Venturi discharge chute can be tilted hydraulically,.
Knives are easy accessible, under a hinged cover, on the top of the machine.
John Deere engine
Options
- Infinitely adjustable flexar reversal fin, saves fuel and reduces noise
- Remote control with Greentec Control System, including proportional valve, instead of standard remote control, and control of the crane rear right
- Closed infeedchain
- Extra loadsense oil pump mounted on the drum shaft max. 200 l. and 240 bar incl. large oil tank and cooler (suitable for any mounted crane)
- Container chassis
Versions
-
Available with 2 or 4 rollers.
Closed infeedchain
Container chassis
Features |
Woodchipper |
Own hydraulic cooling system (using Venturi airflow) |
Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream |
No nonsense machine; chipping at the front, discharge at the back. |
No jacks or accelarator needed, which otherwise shatters good woodchips. |
This prevents unneccassary wear, saves power and therefore fuel, resulting in higher efficiency |
Greentec drum woodchippers stand for uniform chips with low particulate percentage |
Drum |
Knives distributed along the drum. Drum with blower blades on both sides. |
Widia bottom knive placed below cutting knive, easy accessible |
Exterior wall of drum is 15 mm thick and main axe Ø100 mm |
Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
Infeed |
Lowered table for bottom roller providing more space for wood clamp to insert thick logs |
Upper infeed roller on both sides driven by heavy torq engines with embedded oil bearings (low maintenance) |
Bottom roller driven by heavy engine with embedded oiled bearings (low maintenance) |
Screenunit |
Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit |
Quality |
All machines are manufactured out of premium steel 355 (52-3) |
Teeth on infeed rollers are made of hardwearing Hardox steel, guaranteeing agressive infeed for years |
Discharge chute, bottom between infeed roller and anvil knife beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel |
Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
After sandblasting machines are double powder coated |
Servicing |
Knives are easy accessible, under a hinged cover, on the top of the machine. |
Drum is easily secured for changing knives. |
Anvil knife adjustable, and can be used four times |
Technical Specifications | 2-infeed rollers |
Infeed opening (mm) | 600 x 1060 |
Feed opening channel (mm) | 550 x 1060 |
Max. infeed hardwood (mm) | Ø 350 |
Max. infeed softwood (mm) | Ø 550 |
Drum (mm) | Ø 960 x 930 |
Top roller (mm) | Ø 500 x 1060 |
Bottom roller (mm) | Ø 300 x 1060 |
Chipper knives | 4 |
Anvil knives | 1 |
Max. chip length (mm) | 25 |
John Deere 425 HP Tier 4 Final / Stage 5 Capacity app. 150m³/hour |
Automatic hydraulically enabled clutch suitable for 425 hp |
Anti torsy frame |
Built on chassis, side loading |
Platform front and back for easy maintenance |
Greentec Control System 3.0 box with touchscreen, to be placed in the motorhousing |
Hydraulic tilting Venturi discharge funnel 952Mega |
Oil cooler |
High chute 1200mm extension, hydraulic; slewing, up and down, deflector adjustment |
Radio remote control, 2-inch colour display for all chipperfunctions |
Automatic reversible fan for cleaning the radiator |
GCS control – Greentec Control System
- Compact touchscreen control.
- Programs for different wood types.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Easy switch to low engine speed to reduce fuel consumption and noise. This gives coarse wood chips with even lower fine percentage.
- Chip size and wood type adjustable at any time.
- Stopping and if needed short reversing of the infeed responds not only to speed, but also to working pressure of the system.
- GCS control box compact design with stainless steel casing.
- Vulcanised controllers without moving parts, less chance of error.
- In these programs different parameters are adaptable. Pressure down at top roller, starting and stopping speed of the no stress, either or not reversing of the infeed rollers and infeed speed.
- Exclusive on Ufkes Greentec machines.
- Least possible electronics (relay, cables and more), operational reliability.
- Minimum cables on the machine, only Canbus signal with plus and minus.
- Vulcanised controllers without moving parts, less chance of error.
- Waterproof up to IP67.
- 5 languages available; Dutch/English/French/German/Polish.
“Unique system, only with Greentec machines”