Greentec Cheetah 30/80 Chassis highway suitable 4,5/6,5 tons
75/100 HP
30 cm
22 mm
<4500/6500 kg
Fitted as standard
- Own hydraulic cooling system (using airstream of blades of disc)
- Less power needed because the infeed is at an angle
- Combi hand infeed and crane feed, hydraulic raisable
- Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance
- All machines are manufactured out of premium steel 355 (52-3)
- Easy to maintain
Optimum cutting angle.
Combi hand infeed and crane feed, hydraulic raisable
2 agressive infeed rollers.
Options
- Crane with crane control platform or remote control
- Extra cable control tracks
- Cone holder (long)
- RDW-, TÜV- or PVG-approval
Crane platform
Features |
| Woodchipper |
| Own hydraulic cooling system (using airstream of blades of disc) |
| 2 agressive infeed rollers both independently driven |
| Infeed on three sides fitted with anvilknives, making it easy to adjust for right chip length, even after many working hours. |
| Less power needed because the infeed is at an angle |
| Chipper disc |
| Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom beneath disc equipped with replacable wear plate made of hardwearing Hardox steel |
| After sandblasting machines are double powder coated |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| Servicing |
| Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine |
| Disc is easy to lock for chaging the knives |
| Hinged lid over rollers, underneath grease points are easy to reach |
| Anvil knife adjustable, and can be used twice |
Technical Specifications | |
| Infeed opening (mm) | 300 x 580 |
| Feed opening channel (mm) | 300 x 320 |
| Disc (mm) | Ø 960 x 58 |
| Anvil knives | 3 |
| Max. chip length (mm) | 22 |
| Suspended tandemchassis tires 205/65R17,5 |
| Min. -Max. height drawbar 425-895mm |
| Handbrake |
| Drawbar eye Ø 40mm fixed |
| ABS |
| Dual hydraulic support leg in the front |
| Revolutions disc (rpm) | |
| Number of knives on disc | 2 |
| Infeed speed (m/s) | 0,6 |
| Capacity up to (m3/hour) | 30/40 |
| Infeedroller hydraulically opened |
| Combi hand infeed and crane feed, hydraulic raisable |
| Type C chute, hydraulic; slewing, up and down, deflector adjustment |
| Dual hydraulic support leg at the rear |
| 12, Chassis |
| Fully galvanised/electroplated |
| High-speed version 80 km/h |
| 6, Motor |
| Electrical start |
| Control |
| Remote control (GCS1.1) for chipperfunctions Cheetah 30-80<br /> – Deflector adjustment<br /> – Chute rotation<br /> – In/outfeed<br /> – Roll open<br /> – Engine up/down |
