quality
individual
solutions
Greentec 942 drum shredder with electric motor
160 KW
45 cm
400/690
10-25 mm
Fitted as standard
- Powered by electric motors
- The machine is designed as a hopper
- ABF auto feed feed system (auto back feed)
- Feed chain driven by heavy duty wheel motor with integrated bearings (maintenance free)
- Fitted with widia anvil knife
Knives are easy accessible, under a hinged cover, on the top of the machine.
Prepared for mounting sieve decks as standard (can also shred without sieve)
Options
- Quick-change knives
- 5 meters long chain infeed table
- Conveyor belt V4500
10 metres long (2 metres flat, 8 metres raised under 30°)
Effective belt width 700 mm, belt width 800 or 850 mm.
Belt speed approx. 50 m/min
Flights every approx. 330 mm and 75 mm high
Capacity approx. 60 m3/hr - Double control box equipped with:
-Forced ventilation.
-400V to 230V AC/AC safety transformer.
-24 VDC power supply for a safe operatingvoltage.
-12 VDC power supply (max 10 A) to controlhydraulics valves.
-160 kW protected motor group with soft starterfor electric motor
-40 kW protected motor group with soft starter forhydraulic functions
-800 Ampère lever main switch at the front side ofthe control box.
-Emergency stop relay with reset at the front sideof the control box.
-Required connection terminals inside the controlbox.
-Required connection cable to connect theexternal components. Maximum length: 5 m. each - 8 Ft. Container to build in the entire control system
- Radio remote control for Greentec 942EM / 962EM
Quick-change knives
5 meters long chain infeed table
Features |
| Standard ABF autofeed infeed system (auto back feed) |
| Upper infeed roller internally driven by heavy, maintenance free Poclain engine |
| Infeedchain driven by heavy engine with embedded oiled bearings (low maintenance) |
| Standard ready for building on screen unit (can also chip without screen unit). |
| No nonsense machine; chipping at the front, discharge at the back. |
| Greentec drum woodchippers stand for uniform chips with low particulate percentage |
| Fitted with widia anvil knife |
| Drum |
| Knives distributed along the drum. Drum with blower blades on both sides. |
| Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality. |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| After sandblasting machines are double powder coated |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| Screen unit and wear parts are made of Hardox |
| Servicing |
| Knives are easy accessible, under a hinged cover, on the top of the machine. |
| Drum is easily secured for changing knives. |
| Knive are easy to adjust with supplied ruler |
| Anvil knife adjustable |
| Easy accessible grease nipples |
Technical specifications | |
| Infeed opening (mm) | 520 x 710 |
| Feed opening channel (mm) | 450 x 710 |
| Max. infeed hardwood (mm) | Ø 300 |
| Max. infeed softwood (mm) | Ø 450 |
| Drum (mm) | Ø 960 x 730 |
| Top roller (mm) | Ø 430 x 710 |
| Bottom roller (mm) | Ø 300 x 710 |
| Chipper knives | 3 |
| Anvil knives | 1 |
| Max. chip length (mm) | 25 |
| Emergency stop at both sides | |
| Electric motor drive | |
| KW | 160 |
| rpm | 1450 |
| Construction form | B3 |
| Volt | 400/690 |
| Cooling external fan | |
| Electric motor hydraulic system | |
| KW | 40 |
| rpm | 1465 |
| Volt | 400 |
| Machine is executed as a hopper. |
| Control not inculded |
