quality
individual
solutions
Greentec Cheetah 30/80 full electric
- 100% fully electric wood chipper with feed crane
- Designed for professional use
- Quiet machine
- Can be used in environmental zones
- With its own feed crane, the work is lighter and safer, and production is much higher
96 V
30 cm
12 mm
3480 kg
Fitted as standard
- Own hydraulic cooling system (using airstream of blades of disc)
- Less power needed because the infeed is at an angle
- Combi hand infeed and crane feed, hydraulic raisable
- Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance
- All machines are manufactured out of premium steel 355 (52-3)
- Easy to maintain
Optimum cutting angle.
Combi hand infeed and crane feed, hydraulic raisable
Remote control chipper functions
2 agressive infeed rollers.
Options
- Crane with crane control platform or remote control
- Extra cable control tracks
- Cone holder (long)
- RDW-, TÜV- or PVG-approval
- Height-adjustable drawbar
Radio remote control for crane and chipper
Crane platform
Features |
| Woodchipper |
| Own hydraulic cooling system (using airstream of blades of disc) |
| 2 agressive infeed rollers both independently driven |
| Infeed on three sides fitted with anvilknives, making it easy to adjust for right chip length, even after many working hours. |
| Less power needed because the infeed is at an angle |
| Chipper disc |
| Milled disc: disc is even sunken towards the next blade resulting in high infeed speed with minimal resistance |
| Quality |
| All machines are manufactured out of premium steel 355 (52-3) |
| Discharge chute, bottom beneath disc equipped with replacable wear plate made of hardwearing Hardox steel |
| After sandblasting machines are double powder coated |
| Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more |
| Servicing |
| Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine |
| Disc is easy to lock for chaging the knives |
| Hinged lid over rollers, underneath grease points are easy to reach |
| Anvil knife adjustable, and can be used twice |
Technical Specifications | |
| Infeed opening (mm) | 300 x 580 |
| Feed opening channel (mm) | 300 x 320 |
| Disc (mm) | Ø 960 x 58 |
| Anvil knives | 3 |
| Max. chip length (mm) | 22 |
| Number of knives on disc | 1 |
| Revolutions disc (rpm) | 750 |
| Infeedroller hydraulically opened | |
| Combi hand infeed and crane feed, hydraulic raisable | |
| Type C chute, hydraulic; slewing, up and down, deflector adjustment | |
| Hydraulic support leg in the front | |
| Dual hydraulic support leg at the rear | |
| Chip length set at 18 mm | |
| 12, Chassis | |
| Fully galvanised/electroplated | |
| High-speed version 80 km/h |
| Electric motor | |
| kW nom-max | 28-55 |
| Volt | 96 |
| Battery pack: |
| 46,4 kW battery pack incl. onboard charger to charge at 380V/32A connection. Comes with home charger 3 phase with plug type 2. |
| Has the ability to charge at charging station, with a charging capacity of 11 kW |
| Control |
| Remote control (GCSE) for chipperfunctions Cheetah 30-80<br /> – Deflector adjustment<br /> – Chute rotation<br /> – In/outfeed<br /> – Roll open<br /> – Engine up/down |
