Greentec 962 drum shredder with electric motor
The Greentec drum wood chippers are characterized by the wide input, where with others the side branches and splits do not want to continue, they just continue with the Greentec. The large chipping drum (960 mm diameter) continues to shred well in thick wood, even when the blades become a little blunt. Het speciaal design tegenmes snijdt fijne takken onder een andere hoek af, wat resulteert in een betere snipperkwaliteit, dus hogere opbrengst. De onderrol is hoog geplaatst hierdoor trekt hij fijne takken veel beter naar binnen, ook loopt de bovenrol veel gemakkelijker op dik stamhout.
150 KW
65 cm
400/690
Fitted as standard
- Upper infeed rollers internally driven by heavy, low maintenance Poclain motors
- Standard ABF autofeed infeed system (auto back feed)
- Infeedchain driven by heavy engine with embedded oiled bearings (low maintenance)
- Standaard voorbereid voor montage zeef dekken (kan ook zonder zeef snipperen)
- 2 Top rollers with bottom roller and 2 standing infeed rollers Ø 300 x 710, infeed opening 1400mm
(Quick-change) Knives are easy accessible when the infeed rollers are hydraulically positioned above the machine, giving direct view of knive and anvil knife
Standard ready for building on screen unit (can also chip without screen unit).
Features
Wood chipper
Greentec drum woodchippers stand for uniform chips with low particulate percentage.
Drum
6 Knives distributed along the drum
Specially designed anvil knife, small branches are cut at a differente angle, resulting in better chipping quality.
Infeed
Upper infeed rollers internally driven by heavy, low maintenance Poclain motors
This means no open slots on both sides of the feed channel, this prevents chips from splashing outwards
Bottom roller driven by heavy engine with embedded oiled bearings (low maintenance).
Quality
All machines are manufactured out of premium steel 355 (52-3).
Discharge chute and bottom beneath the drum equipped with replacable wear plate made of hardwearing Hardox steel.
After sandblasting machines are double powder coated.
Machines are made of durable materials, including bearings, hydraulic valves, engines, pumps and more.
Maintenance
Knives are easy accessible, under a hinged cover, on the top of the machine.
Drum is easily secured for changing knives.
Knives are easy to adjust with supplied ruler.
Anvil knife adjustable, and can be used twice
Grease nipples are easily accessible.
Technical specifications
.
Infeed opening
Feed opening channel
Drum
Top roller
Bottom roller (mm)
Chipper knives
Anvil knives
KW
rpm
Volt
5 infeed rollers
700 x 920 mm
650 x 920 mm
960 x 930 mm
Ø 350
Ø 300
6
1
150
1450
400/690
Electric motor hydraulic
20 KW
1465 rpm
400 volt